In many warehouses, the floor may look “okay” at first but gradually becomes an efficiency killer: forklift and pallet truck traffic, constant manoeuvring, braking and turning movements cause abrasion, rough running zones and increasingly uneven driving conditions. The result: higher rolling resistance, more effort for cleaning and maintenance, and often problems at edges and transitions.
The LuxTek warehouse flooring system therefore does not rely on sensitive coatings that reach their limits under everyday traffic, but on a solid engineering plastic (PE-HMW/UHMW) whose resistance is inherent in the material itself. As a modular overlay system, the flooring is installed on the existing substrate – quickly, cleanly and without curing times. This creates a durable working surface that protects the underlying floor while functioning as a standalone warehouse floor – ideal where areas need to be available immediately and downtime is costly.
In a warehouse, load capacity is only one part of the equation. What really matters is the continuous daily stress caused by rolling traffic: forklifts, pallet trucks, frequent braking, acceleration and manoeuvring. This combination causes many floors to wear quickly – traffic routes become rough, uneven and increasingly maintenance-intensive.
With the LuxTek warehouse floor, the resistance comes from the material itself (PE-HMW/UHMW) – not from a sensitive top layer that can detach or be undermined.
Your advantage: durable traffic routes and working areas – even under high traffic volumes and continuous operation.
A warehouse floor should support your processes. If manoeuvring becomes difficult or pallet trucks require more effort to move, valuable time is lost – especially over long distances and in high-frequency operations. The LuxTek warehouse floor is designed for good sliding and rolling properties, allowing vehicles and equipment to move more efficiently.
Your advantage: easier manoeuvring and reduced rolling resistance – noticeable in day-to-day operations.
In logistics areas, cleaning needs to be quick and must not slow down operations. The robust, water-resistant surface is easy to clean and suitable for everyday use – without having to treat the floor like a sensitive coating.
Your advantage: less cleaning effort – even in high-traffic areas and during ongoing operations.
The LuxTek warehouse floor is installed as an overlay system on the existing substrate and securely connected using a tongue-and-groove system. This means: no construction chemicals, no grinding, no priming, no drying and no curing.
The surface can be used immediately after installation – ideal when traffic routes or warehouse areas need to be available again quickly.
Your advantage: install it, finish the job and continue working – without unnecessary downtime.
Thanks to the modular sections (4 × 1 m / 2 × 1 m), areas can be clearly defined – for example traffic routes, picking zones or transition areas. If processes change, individual sections can be adapted, extended or dismantled and reused elsewhere if required.
Your advantage: flexible areas that can grow and change with your warehouse – instead of requiring a new investment every time.
Beton, Beschichtungen und klassische Plattensysteme funktionieren im Lager oft nur so lange gut, bis der Alltag richtig zuschlägt: Stapler- und Hubwagenverkehr, ständiges Rangieren und hohe Frequenz. Beton ist zwar tragfähig, wird in Verkehrswegen aber schnell rau – der Rollwiderstand steigt, Fahrten werden unruhiger und Schäden entstehen typischerweise genau an Kanten, Übergängen und stark befahrenen Zonen. Beschichtungen sehen anfangs sauber aus, sind im Logistikbetrieb aber häufig empfindlich, wenn Scherkräfte und Kantenbelastungen dazukommen. Und wenn die Schicht beschädigt ist, heißt das meist: Vorbereitung + Aushärtung + Stillstand. Systeme mit vielen Fugen bringen zusätzlich unnötige Schwachstellen: Schmutz sammelt sich, Reinigung wird aufwendiger, Unebenheiten stören den Transport.
Der LuxTek Lagerboden setzt deshalb auf Materialperformance statt Belag-Logik. Als Overlaylösung entsteht eine belastbare Nutzschicht aus PE-HMW/UHMW, die den Bestandsboden schützt und den Rollverkehr dauerhaft abkann. Die Widerstandsfähigkeit steckt im Material, nicht in einer aufgetragenen Schicht – es gibt also nichts, was abplatzen oder unterwandert werden kann. Ergebnis: weniger Verschleiß im Staplerbetrieb, leichteres Rangieren durch niedrigen Reibwiderstand und eine Fläche, die sich im laufenden Betrieb einfacher sauber halten lässt.
The LuxTek warehouse flooring system is particularly suitable for areas where high levels of rolling traffic, continuous loads and rapid availability of the floor come together:
Depending on the specification, the LuxTek warehouse flooring system can withstand loads of up to 120 tonnes. The key factor is not only the total weight, but how the load acts in practice: rolling traffic, wheel loads, turning and shear movements, as well as the structure and condition of the substrate. We briefly review these points with you so that our recommendation matches your actual application.
Yes – this is exactly what the system is designed for. The PE-HMW/UHMW material is engineered for high abrasion and wear resistance and remains robust under everyday traffic conditions. For the correct specification, we briefly assess usage, frequency and the relevant load cases, such as vehicle type and wheel loads.
Immediately after installation. The warehouse flooring is installed as an overlay system – without construction chemicals and without curing times. This reduces downtime and makes the system particularly attractive when traffic routes or warehouse zones need to be available again quickly.
Yes – thanks to its reusability, the overlay flooring system can be regarded as a capital asset: purchase it once, dismantle it when required and reuse it at another location or in a new floor layout, instead of effectively consuming the solution every time changes are made.
The LuxTek overlay flooring system is made from recyclable plastic and, depending on the selected version, is also available in 100% recycled plastic. Its reusability also supports a more resource-efficient approach by reducing the need for single-use solutions and repeated reconstruction.
Yes. We support you with planning and specification, for example traffic routes, zones, transitions and load cases, and can also carry out the professional installation on site if required – for a clear process with minimal disruption to operations.