High quality plastic support pads from LuxTek
What are support pads?

It is not uncommon for avoidable accidents to occur on construction sites because cranes, construction machinery and trucks are inadequately secured and as a result tip over or sink into unpaved terrain. Such incidents can be easily avoided with support pads or outrigger pads. With our plastic support plates from our range of support technology, we always offer the right support surface for your machines and vehicles. On request, we can also supply you with special sizes and crane support plates with special milled recesses.

What do support pads do?

Our support pads provide reliable stability for your machines and offer a large support surface with optimum load distribution. This means that the point load from leveling feet of cranes and other vehicles is distributed over the entire surface of the plate, thus exerting significantly less pressure on the ground. Our plastic plates for outdoor use can thus prevent damage and compaction of the ground. At the same time, the overturning and sinking of vehicles and machines is prevented with the load distribution plates.

What advantages do load distribution plates made of plastic offer me?

Load distribution plates made of plastic, compared to the products made of steel, hardwood or rubber, are more resistant to weathering, more durable and quite simply better to handle. The support plates are not only much more resilient, but also much lighter. Thanks to the integrated carrying cords, you can easily transport the support plates from one place of use to the next.

The advantages at a glance:

  • Robust: as extremely resistant, break-proof and low-wear.
  • Lightweight: because it can be laid quickly and flexibly
  • Durable: weather and UV resistant
  • Optimum hold: on load-bearing substrates

Is plastic really stable enough?

All support pads in our range are made of particularly durable PE-HMW and PE-UHMW plastic. The shims are manufactured in Germany by means of a pressing process. They meet the strict DIN and ISO standards and contain no plasticizers. Our plastic crane plates are resistant to UV radiation, heat and frost. They can withstand temperature fluctuations from -80 to +80 degrees Celsius without any problems. This means that weather-resistant plastic plates are in no way inferior to other materials.

What plastic support systems are available?

In addition to support pads, we also offer slide pads and outrigger pads for various applications.

Support pad Performance
  • loadable up to 60 tons
  • among others for construction vehicles or working platforms

Support pad Performance

Slide pad Performance
  • loadable between 25 and 30 tons
  • among other things for scaffolding or machine feet

Slide pad Performance

Supporting blocks
  • loadable up to 25 tons
  • as a base for forklifts or machines

Supporting blocks

Crane support beams
  • can be laid one on top of the other
  • e.g. for construction machines, loading cranes, trailers and lifting platforms

Crane support beams

Container plates
  • loadable up to 25 tons
  • for installation and under ventilation of containers

Container plates

Outrigger pads Rolling
  • loadable up to 70 tons
  • e.g. for working platforms, towing vehicles, fire department / THW vehicles or heavy-duty cranes

Outrigger pads Rolling

Modul support pads
  • can be combined and extended as required
  • e.g. for working platforms, towing vehicles, fire department / THW vehicles or heavy-duty cranes

Modul support pads

Dynamic Module support system
  • different inclination angles possible
  • for a secure hold on inclines and declines

Dynamic Module support system

Driveway curb ramps
  • standard for heights up to 100 mm
  • for driving over difficult or sharp-edged places

Driveway curb ramps

Where can I get suitable accessories for support pads and
slide pads from?

In our portfolio you will also find extensive accessories for your plastic support plates. So that you can easily transport the outrigger pads, we offer transport boxes in various sizes. The boxes are made of galvanized round steel. Just as with the plastic plates, we guarantee a long service life thanks to their high resistance to weather and environmental influences.

With the transport holders, you can attach the support pads directly to your vehicle and always have them quickly at hand. Whether the attachment is on the left or right side of your vehicle, we have the right transport holder for you.

For even more safety and additional support, the support foot lock. You simply attach this to the top of the slide pad and nothing can slip anymore. You can use the support foot locking device on both round and square slide pads. For the support pads, LuxTek offers so-called support foot milled grooves to guarantee better hold.

Can the plates also be customized?

We are happy to mill the support plates with your name or initials. The milling not only ensures theft protection, but also serves as a permanent advertisement for your company.

Furthermore, we offer additional features, such as anti-slip surface, spikes, reflectors, or even a roughened surface of the support pads.

Do you have questions about our products or the application of our support pads?
Please feel free to contact us. We will be happy to help you.
Contact now